Load data for 6 x 70 R + .243 | 106gr | SUS-TAC HP

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.243 \| 106gr \| SUS-TAC HP
Manufacturer SKU:	H13234
Bullet Weight:	106gr \| 6.9g
Bullet Diameter:	0.243" \| 6.17mm
Bullet Length:	1.378" \| 35.0mm
Caliber:	6 x 70 R load data
Case Length (l3):	2.750" \| 69.8mm
Cartridge Length (C.O.L.):	3.374" \| 85.7mm
Seated Depth:	0.754" \| 19.2mm
Shank Seated Depth:	0.552" \| 14.0mm
Case Capacity:	39.9 Grains of Water \| 2.59 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	37710 psi \| 2600 bar
LID:	LID_B10309_C972
Last updated:	2025-01-01
Recommended Twist Rate:	1:7 - 1:6

Load data for 44 loads in caliber 6 x 70 R with .243 | 106gr | SUS-TAC HP bullet and 22 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
Accurate 4064	<<locked>>	83%	33518	89%	**80	99%
[Accurate 4350]*	<<locked>>	94%	33837	90%	**39	93%
Alliant Reloder- TS 15.5	<<locked>>	83%	32924	87%	**67	96%
[Alliant Reloder-16]*	<<locked>>	92%	33707	89%	**03	92%
Alliant Reloder-17	<<locked>>	88%	33794	90%	**39	95%
[Hodgdon H380]*	<<locked>>	83%	33504	89%	**60	92%
[Hodgdon Hybrid 100V]*	<<locked>>	94%	32735	87%	**67	94%
[Hodgdon VARGET]*	<<locked>>	83%	33605	89%	**34	93%
[IMR 4064]*	<<locked>>	83%	33576	89%	**28	94%
[IMR 4831]*	<<locked>>	97%	32895	87%	**87	92%
[Norma URP]*	<<locked>>	92%	33533	89%	**06	92%
ReloadSwiss RS 52	<<locked>>	83%	33127	88%	**06	97%
ReloadSwiss RS 60	<<locked>>	88%	32996	88%	**20	95%
Rottweil R 903	<<locked>>	87%	33649	89%	**90	96%
[SNPE Vectan SP 11]*	<<locked>>	85%	33750	89%	**93	94%
SNPE Vectan Tubal 5000	<<locked>>	83%	33721	89%	**95	99%
Somchem S355	<<locked>>	85%	33707	89%	**70	95%
Somchem S365	<<locked>>	96%	33924	90%	**56	97%
Vihtavuori N135	<<locked>>	87%	33924	90%	**60	100%
Vihtavuori N150	<<locked>>	90%	33228	88%	**44	97%
[Vihtavuori N550]*	<<locked>>	88%	32822	87%	**97	92%
Winchester 6.5 StaBALL	<<locked>>	90%	33895	90%	**47	95%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
Accurate 4064	<<locked>>	81%	31125	83%	**31	98%
[Accurate 4350]*	<<locked>>	89%	29312	78%	**28	91%
Alliant Reloder- TS 15.5	<<locked>>	81%	30719	81%	**11	95%
[Alliant Reloder-16]*	<<locked>>	88%	30748	82%	**21	90%
[Alliant Reloder-17]*	<<locked>>	82%	27789	74%	**75	91%
[Hodgdon H380]*	<<locked>>	81%	31386	83%	**15	91%
[Hodgdon Hybrid 100V]*	<<locked>>	86%	25933	69%	**83	90%
[Hodgdon VARGET]*	<<locked>>	81%	31415	83%	**85	92%
[IMR 4064]*	<<locked>>	81%	31154	83%	**72	93%
[IMR 4831]*	<<locked>>	92%	28834	76%	**88	90%
[Norma URP]*	<<locked>>	89%	30255	80%	**24	90%
ReloadSwiss RS 52	<<locked>>	81%	30864	82%	**57	96%
[ReloadSwiss RS 60]*	<<locked>>	81%	26295	70%	**26	90%
[Rottweil R 903]*	<<locked>>	81%	28224	75%	**56	93%
[SNPE Vectan SP 11]*	<<locked>>	81%	29486	78%	**92	92%
SNPE Vectan Tubal 5000	<<locked>>	81%	31343	83%	**49	99%
[Somchem S355]*	<<locked>>	81%	29312	78%	**65	93%
[Somchem S365]*	<<locked>>	86%	24453	65%	**87	91%
Vihtavuori N135	<<locked>>	81%	28297	75%	**39	99%
[Vihtavuori N150]*	<<locked>>	81%	25092	67%	**44	93%
[Vihtavuori N550]*	<<locked>>	85%	29834	79%	**18	90%
[Winchester 6.5 StaBALL]*	<<locked>>	82%	26237	70%	**51	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data